phone
Order Now!
662 639 0690
Results 25 - 36 of 46
Liquidyn P-Jet Series Jetting Valves
Dispense low- to medium-viscosity fluids in extremely accurate, repeatable beads and lines with the high-performance Liquidyn® P-Jet jet valve. Micro-deposits as small as 3 nL can be applied at up to 280Hz.
Liquidyn P-Jet SolderPlus Jetting System
This complete solder paste jetting system is designed specifically to jet Nordson EFD SolderPlus® dispensing paste with high accuracy and repeatability at faster speeds for increased productivity.
Liquidyn V200 Valve Controllers
The multi-functional Liquidyn® V200 controller provides safe, easy operation of the Liquidyn P-Jet and Liquidyn P-Dot series jet valves and greater control over dispensing outcomes.
MC781 Pulsed Lubrication System
Apply a fine, uniform coating of lubricants, corrosion inhibitors, and release agents from any angle with the MicroCoat® MC781 Pulsed Lubrication System from Nordson EFD.
MC800 Continuous Lubrication Systems
Designed for continuous lubrication, Nordson EFD’s MicroCoat® MC800 Series system eliminates oil waste. Configure up to eight valves independently.
Metal Nozzles
Our metal nozzles are 100% stainless steel free of flash and burrs. With a 1/4 NPT (6.35 mm) thread, they fit Nordson EFD 725 Series and 736HPA-NV valves.
MicroMark Spray Marking Valve Systems
Nordson EFD’s unique MicroMark® spray marking systems eliminate clogging, maintenance, and downtime by using a programmable air delay after each cycle to clean the spray nozzle.
PICO Pulse Contact Dispense Valves
Apply precise microdots and control surge when dispensing lines and stripes with the PICO Pµlse® contact dispense valve.
PICO Pulse Jetting Valve Series
Nordson EFD’s PICO Pµlse® exchangeable, modular jet valve technology dispenses with industry-leading accuracy and speed to apply very precise, repeatable micro-deposits at 1000Hz continuous and bursts up to 1500Hz
PICO Toµch Controllers
The PICO® Toµch™ controller’s intuitive touchscreen interface greatly simplifies setup and operation of the PICO Pµlse® valve, while allowing precise adjustment of valve parameters.
Plastic Nozzles
Polyethylene nozzles securely thread into all Optimum® cartridge sizes, 725 Series piston valves, and 736HPA-NV high pressure valves.
PTFE-Coated Tips
Optimum® PTFE-coated dispense tips control wicking to stop dripping. By providing fast, clean cutoff they increase productivity and reduce material waste.
About Us
 |
|